概述
summary
安装根据汽车座椅的设计，各个支撑部位配备牵引弹力绳，配备专用挂钩或粘扣，挂在前车椅的底部或者后车椅背部即可；或者将挂钩固定在座椅底部的铁板孔中即可。
Installation according to the design of the car seat, each supporting part is equipped with a traction elastic rope, equipped with a special hook or fastener, which can be hung on the bottom of the front car seat or the back of the rear car seat; or the hook can be fixed in the iron plate hole at the bottom of the seat.
具体方法
Specific methods
1、头枕安装：头枕是帽式设计，直接套入座椅头枕加以调整即可。
1. Headrest installation: the headrest is a hat type design, which can be directly inserted into the headrest for adjustment.
2、靠背安装：靠背为套式结构，直接套入背靠即可，拉紧底部松紧带，并扣上搭扣。
2. Installation of backrest: the backrest is a sleeve structure, which can be directly inserted into the backrest. Tighten the bottom elastic belt and buckle it.
3、座垫安装：座垫为罩式设计，罩上以后里侧拉紧底部松紧带，并扣上搭扣或绳。安装时，应该先将头枕卸下，先安装靠背，靠背下面的牛筋一定要用挂钩钩牢，保证靠背一定有型，靠背两边要从上向下抚摸平整，不要留有皱痕。
3. Seat cushion installation: the seat cushion is designed as a cover. After the cover is put on, the bottom elastic belt shall be tightened at the inner side, and the buckle or rope shall be buckled. During installation, the headrest should be removed first, and the backrest should be installed first. The cowhide under the backrest must be fastened with a hook to ensure that the backrest must be of a certain shape. Both sides of the backrest should be stroked from top to bottom, without wrinkles.