后座很多车友不知道怎么翻开，其实很简单，将后背放倒，就会发现靠后备箱那一面，座椅下在有一个宽的黑色的布条，两个，拉动的时候就可以将后座翻开了，翻开后座套就好装啦。将座套在座位上展开，从头靠部位开始慢慢往下拉，确保座套端正，座套花形位置在中间。在座与靠的交接处幼小弯头，将小弯头塞在座与靠的缝隙里。这样座套就不容易移位。
Many people in the back seat don't know how to turn it over. In fact, it's very simple. If you put your back down, you will find that there is a wide black cloth strip under the seat, two of which can be turned over when you pull it. When you turn it over, it's easy to install the seat cover. Unfold the seat cover on the seat, and slowly pull down from the top of the seat to ensure that the seat cover is upright and the flower shaped position of the seat cover is in the middle. Small elbows shall be placed at the joint of seat and lean, and the small elbows shall be plugged into the gap between seat and lean. In this way, the seat cover is not easy to shift.
座的部位要对准，座的形状要显现出来，座的下面有松紧圈，用小铁钩将松紧拉在座位下面，保证座套更加伏贴。汽车座套套头靠的时候须先将座椅头靠的拿下来然后将头靠展开套上，并将四个角整理服帖用松紧绑好，头靠就安装好了。套后座后靠的时候也须先将后座拿下来，再将后座铺开套起，然后将座套上的松紧钩在座位下面但是特别要注意对好位置不要随意。
The part of the seat shall be aligned, and the shape of the seat shall be shown. There is an elastic ring under the seat. Use a small iron hook to pull the elastic ring under the seat to ensure that the seat cover is more snug. When the car seat cover is put on the headrest, the headrest should be taken off first, then the headrest should be spread out and put on, and the four corners should be arranged and tied with elastic, and the headrest should be installed. When the backseat is put back, the backseat shall be taken down first, then the backseat shall be spread out and put up, and then the elastic hook on the seat cover shall be under the seat, but special attention shall be paid to the proper position.